I’m making some chairs from an oak tree that was taken down in our back yard. These chairs require that some of the parts be steam bent. I’m starting with the simplest of the few chairs that I think I’ll be able to get out of this log, a post and rung rocker. The two long back posts need a gentle bend in the design I’m building. So I needed a steam box. I could have gone the simplest route and bought a PVC pipe and some end caps. That’s not my style though. I like wood.
So the next trial of the steam box will be some back bows and arm rails for a sack back Windsor chair (or two). While the stock for those parts is only on the order of 3/4″ thick or so, the bends are much more dramatic, so they’ll be a much better test of the steam box and the wood from this tree. I’m excited though. This is fun stuff!
I finally got around to applying the finish to the entertainment center doors. I took a finishing sequence from an old Fine Woodworking article on finishing walnut by Jeff Jewitt. While it is a bit involved, I think it served to even out the different colors of the different walnut boards quite nicely. I still need to build the upper bookshelf units, but at least the lower sections are now 100% complete.